skip to Main Content

huawei cihazlarda default konfigürasyon

huawei cihazlarda cli da “display this” komutu ile bulunduğunuz dizindeki mevcut konfigürasyonu görebilirsiniz. ancak default olarak yapılandırılmış konfigürasyon mevcuttur. bunu görmek için display this” komutuna include-default parametresi ilave edilerek kullanılabilir.

aşağıdaki örnekte bir interfacedeki default konfigürasyon görülmektedir.

[ferhatcicek-Ethernet0/0/1]display this include-default 
#
interface Ethernet0/0/1
 portswitch
 undo shutdown
 enable snmp trap updown
 undo set flow-stat interval
 undo qinq vlan-translation enable
 undo mac-address learning disable
 port priority 0
 port link-type hybrid
 port hybrid pvid vlan 1
 port hybrid untagged vlan 1
 qinq protocol 8100
 undo loopback-detect enable
 stp enable
 undo stp config-digest-snoop
 undo stp no-agreement-check
 undo stp root-protection
 undo stp loop-protection
 stp transmit-limit 147
 stp point-to-point auto
 stp compliance auto
 stp instance 0 port priority 128
 undo port mux-vlan enable
 undo mac-vlan enable
 undo ip-subnet-vlan enable
 undo rmon-statistics
 undo smart-link flush receive
 undo smart-link vll-notify enable
 undo ntdp enable
 undo ndp enable
 bpdu enable
 undo portal local-server enable
 undo dot1x enable
 dot1x max-user 256
 dot1x port-control auto
 dot1x port-method mac
 undo dot1x reauthenticate
 undo authentication critical eapol-success
 authentication max-reauth-req 20
 undo mac-authen
 mac-authen max-user 256
 mac-authen reauthenticate
 undo authentication open
 undo port-auto-sleep enable
 undo port-security enable
 undo qinq vlan-translation miss-drop
 undo port discard tagged-packet
 mac-learning priority 0
 undo mac-address flapping trigger error-down
 undo mac-address flapping trigger quit-vlan
 jumboframe enable 9216
 undo set flow-statistics include-interframe
 trap-threshold input-rate 100 resume-rate 100
 trap-threshold output-rate 100 resume-rate 100
 log-threshold input-rate 100 resume-rate 100
 log-threshold output-rate 100 resume-rate 100
 trap-threshold error-statistics 3 interval 10
 carrier up-hold-time 2000
 carrier down-hold-time 0
 undo port link-flap protection enable
 qos wrr
 qos queue 0 wrr weight 1
 qos queue 1 wrr weight 1
 qos queue 2 wrr weight 1
 qos queue 3 wrr weight 1
 qos queue 4 wrr weight 1
 qos queue 5 wrr weight 1
 qos queue 6 wrr weight 1
 qos queue 7 wrr weight 1
 trust 8021p outer
 undo dei enable
 qos phb marking enable
 undo arp anti-attack rate-limit enable
 undo arp-miss anti-attack rate-limit enable
 undo arp anti-attack check user-bind enable
 undo ip source check user-bind enable
 unicast-suppression 100
 multicast-suppression 100
 broadcast-suppression 100
 storm-control interval 5
 port type nni
 undo nd snooping enable
 undo nd snooping trusted
 undo dhcpv6 remote-id insert enable
 undo dhcpv6 remote-id rebuild enable

This Post Has 0 Comments

Bir cevap yazın

Back To Top