huawei 5700 serisi switchlerde lldp konfigürasyonu
huawei serisi switchlerde basit lldp konfigürasyonu nasıl yapılır. incelemeye çalışalım.
[switch_a]display lldp local Error: Global LLDP is not enabled.
bu bize lldp nin globalde aktif edilmesi gerektiğini söylüyor.
[switch_a]lldp enable Info: Global LLDP is enabled successfully.
display lldp local komutunu tekrar çalıştıralım..
[switch_a]display lldp local System information -------------------------------------------------------------------------- Chassis type :macAddress Chassis ID :4c1f-cc60-60d8 System name :switch_a System description :S5700-28C-HI Huawei Versatile Routing Platform Software VRP (R) software,Version 3.30 (S5700 V200R001C00) Copyright (C) 2007 Huawei Technologies Co., Ltd. System capabilities supported :bridge System capabilities enabled :bridge LLDP Up time :2014/7/6 20:0:17 MED system information -------------------------------------------------------------------------- Device class :Network Connectivity (MED inventory information of master board) HardwareRev :VER B FirmwareRev :NA SoftwareRev :Version 3.30 V200R001C00 SerialNum :NA Manufacturer name :HUAWEI TECH CO., LTD Model name :NA Asset tracking identifier :NA System configuration -------------------------------------------------------------------------- LLDP Status :enabled (default is disabled) LLDP Message Tx Interval :30 (default is 30s) LLDP Message Tx Hold Multiplier :4 (default is 4) LLDP Refresh Delay :2 (default is 2s) LLDP Tx Delay :2 (default is 2s) LLDP Notification Interval :5 (default is 5s) LLDP Notification Enable :enabled (default is disabled) Management Address : Remote Table Statistics: -------------------------------------------------------------------------- Remote Table Last Change Time :0 days, 0 hours, 0 minutes, 0 seconds Remote Neighbors Added :0 Remote Neighbors Deleted :0 Remote Neighbors Dropped :0 Remote Neighbors Aged :0 Total Neighbors :0 Port information: -------------------------------------------------------------------------- Interface GigabitEthernet0/0/1: LLDP Enable Status :enabled (default is disabled) Total Neighbors :0 Port ID subtype :interfaceName Port ID :GigabitEthernet0/0/1 Port description :
şeklinde devam eden bize bir çıktı verecektir. bundan sonra lldp management adresinin eklenmesi ve uplinke ait port tanımlarının yapılması gerekli. burada temel olarak loopback0 ile aynı yaparız.
[switch_a]lldp management-address 10.10.10.1 Error: The IP Address does not exist. [switch_a]interface LoopBack0 [switch_a-LoopBack0]ip address 10.10.10.1 255.255.255.255 [switch_a]lldp management-address 10.10.10.1 Info: Setting management address successfully. [switch_a]interface GigabitEthernet 0/0/1 [switch_a-GigabitEthernet0/0/1]bpdu enable [switch_a-GigabitEthernet0/0/1]q
bundan sonra lldp local komutunu çıktısını incelersek management ip artık yer aldığı görülecektir.
[switch_a]display lldp local System information -------------------------------------------------------------------------- Chassis type :macAddress Chassis ID :4c1f-cc60-60d8 System name :switch_a System description :S5700-28C-HI Huawei Versatile Routing Platform Software VRP (R) software,Version 3.30 (S5700 V200R001C00) Copyright (C) 2007 Huawei Technologies Co., Ltd. System capabilities supported :bridge System capabilities enabled :bridge LLDP Up time :2014/7/6 20:0:17 MED system information -------------------------------------------------------------------------- Device class :Network Connectivity (MED inventory information of master board) HardwareRev :VER B FirmwareRev :NA SoftwareRev :Version 3.30 V200R001C00 SerialNum :NA Manufacturer name :HUAWEI TECH CO., LTD Model name :NA Asset tracking identifier :NA System configuration -------------------------------------------------------------------------- LLDP Status :enabled (default is disabled) LLDP Message Tx Interval :30 (default is 30s) LLDP Message Tx Hold Multiplier :4 (default is 4) LLDP Refresh Delay :2 (default is 2s) LLDP Tx Delay :2 (default is 2s) LLDP Notification Interval :5 (default is 5s) LLDP Notification Enable :enabled (default is disabled) Management Address :IP: 10.10.10.1 Remote Table Statistics: -------------------------------------------------------------------------- Remote Table Last Change Time :0 days, 0 hours, 0 minutes, 0 seconds Remote Neighbors Added :0 Remote Neighbors Deleted :0 Remote Neighbors Dropped :0 Remote Neighbors Aged :0 Total Neighbors :0 Port information: --------------------------------------------------------------------------
lokal kısım ile ilgili yapacaklarımız bitti. uzak uç ile ilgili bilgilere bakalım.. bunun için lldp neighbor komutunu kullanıyoruz. aşagıdaki çıktıdan görüldüğü üzere interfacelerde herhangi bir cihaz alğılanmamış durumda.
[switch_a]display lldp neighbor GigabitEthernet0/0/1 has 0 neighbors GigabitEthernet0/0/2 has 0 neighbors GigabitEthernet0/0/3 has 0 neighbors GigabitEthernet0/0/4 has 0 neighbors GigabitEthernet0/0/5 has 0 neighbors
uç cihaz konfigürasyonlarınıda yaptıktan sonra tekrar bakacak olursak interface karşı uca ati bilgilerin geldiği görülecektir.
[switch_a]display lldp neighbor GigabitEthernet0/0/1 has 1 neighbors: Neighbor index : 1 Chassis type :macAddress Chassis ID :4c1f-cccc-3a18 Port ID type :interfaceName Port ID :GigabitEthernet0/0/1 Port description :NA System name :switch_b System description :S5700-28C-HI Huawei Versatile Routing Platform Software VRP (R) software,Version 3.30 (S5700 V200R001C00) Copyright (C) 2007 Huawei Technologies Co., Ltd. System capabilities supported :bridge System capabilities enabled :bridge Management address type :ipV4 Management address : 20.10.10.1 Expired time :112s Port VLAN ID(PVID) :1 VLAN name of VLAN 1: VLAN1 Protocol identity :STP STP LACP EthOAM CFM Auto-negotiation supported :No Auto-negotiation enabled :No OperMau :speed(0)/duplex(Half) Power port class :PD PSE power supported :No PSE power enabled :No PSE pairs control ability:No Power pairs :Unknown Port power classification:Unknown Link aggregation supported:Yes Link aggregation enabled :No Aggregation port ID :0 Maximum frame Size :9216 EEE support :No Transmit Tw :0 Receive Tw :0 Fallback Receive Tw :0 Echo Transmit Tw :0 Echo Receive Tw :0 MED Device information Device class :Network Connectivity HardwareRev :VER B FirmwareRev :NA SoftwareRev :Version 3.30 V200R001C00 SerialNum :NA Manufacturer name :HUAWEI TECH CO., LTD Model name :NA Asset tracking identifier :NA Media policy type :Voice Unknown Policy :Defined VLAN tagged :Yes Media policy VlanID :0 Media policy L2 priority :5 Media policy Dscp :46 Power Type :Unknown PoE PSE power source :Unknown Port PSE Priority :Unknown Port Available power value:2 GigabitEthernet0/0/2 has 0 neighbors GigabitEthernet0/0/3 has 0 neighbors GigabitEthernet0/0/4 has 0 neighbors GigabitEthernet0/0/5 has 0 neighbors