huawei cihazlarda default konfigürasyon

huawei cihazlarda cli da “display this” komutu ile bulunduğunuz dizindeki mevcut konfigürasyonu görebilirsiniz. ancak default olarak yapılandırılmış konfigürasyon mevcuttur. bunu görmek için display this” komutuna include-default parametresi ilave edilerek kullanılabilir.

aşağıdaki örnekte bir interfacedeki default konfigürasyon görülmektedir.

[ferhatcicek-Ethernet0/0/1]display this include-default 
#
interface Ethernet0/0/1
 portswitch
 undo shutdown
 enable snmp trap updown
 undo set flow-stat interval
 undo qinq vlan-translation enable
 undo mac-address learning disable
 port priority 0
 port link-type hybrid
 port hybrid pvid vlan 1
 port hybrid untagged vlan 1
 qinq protocol 8100
 undo loopback-detect enable
 stp enable
 undo stp config-digest-snoop
 undo stp no-agreement-check
 undo stp root-protection
 undo stp loop-protection
 stp transmit-limit 147
 stp point-to-point auto
 stp compliance auto
 stp instance 0 port priority 128
 undo port mux-vlan enable
 undo mac-vlan enable
 undo ip-subnet-vlan enable
 undo rmon-statistics
 undo smart-link flush receive
 undo smart-link vll-notify enable
 undo ntdp enable
 undo ndp enable
 bpdu enable
 undo portal local-server enable
 undo dot1x enable
 dot1x max-user 256
 dot1x port-control auto
 dot1x port-method mac
 undo dot1x reauthenticate
 undo authentication critical eapol-success
 authentication max-reauth-req 20
 undo mac-authen
 mac-authen max-user 256
 mac-authen reauthenticate
 undo authentication open
 undo port-auto-sleep enable
 undo port-security enable
 undo qinq vlan-translation miss-drop
 undo port discard tagged-packet
 mac-learning priority 0
 undo mac-address flapping trigger error-down
 undo mac-address flapping trigger quit-vlan
 jumboframe enable 9216
 undo set flow-statistics include-interframe
 trap-threshold input-rate 100 resume-rate 100
 trap-threshold output-rate 100 resume-rate 100
 log-threshold input-rate 100 resume-rate 100
 log-threshold output-rate 100 resume-rate 100
 trap-threshold error-statistics 3 interval 10
 carrier up-hold-time 2000
 carrier down-hold-time 0
 undo port link-flap protection enable
 qos wrr
 qos queue 0 wrr weight 1
 qos queue 1 wrr weight 1
 qos queue 2 wrr weight 1
 qos queue 3 wrr weight 1
 qos queue 4 wrr weight 1
 qos queue 5 wrr weight 1
 qos queue 6 wrr weight 1
 qos queue 7 wrr weight 1
 trust 8021p outer
 undo dei enable
 qos phb marking enable
 undo arp anti-attack rate-limit enable
 undo arp-miss anti-attack rate-limit enable
 undo arp anti-attack check user-bind enable
 undo ip source check user-bind enable
 unicast-suppression 100
 multicast-suppression 100
 broadcast-suppression 100
 storm-control interval 5
 port type nni
 undo nd snooping enable
 undo nd snooping trusted
 undo dhcpv6 remote-id insert enable
 undo dhcpv6 remote-id rebuild enable